Deja un mensaje
¡Te llamaremos pronto!
¡Su mensaje debe tener entre 20 y 3.000 caracteres!
¡Por favor revise su correo electrónico!
Más información facilita una mejor comunicación.
¡Enviado satisfactoriamente!
¡Te llamaremos pronto!
Deja un mensaje
¡Te llamaremos pronto!
¡Su mensaje debe tener entre 20 y 3.000 caracteres!
¡Por favor revise su correo electrónico!
Lugar de origen: | CHINA |
---|---|
Nombre de la marca: | GESTER |
Certificación: | CE, ISO |
Número de modelo: | GT-M82 |
Cantidad de orden mínima: | 1 sistema |
Detalles de empaquetado: | Empaquetado de madera |
Tiempo de entrega: | 10-30 días |
Condiciones de pago: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Capacidad de la fuente: | 200 sistemas/mes |
Uso: | equipo de prueba de los juguetes | Garantía: | 1 año |
---|---|---|---|
Nombre de producto: | Probador de la fuerza de la vespa de los juguetes | Uso: | juguetes y materiales del juguete |
Fuente de alimentación: | 220V 50Hz | Tecnología: | Profesional |
Gester: | El SGS auditó al proveedor, TUV | ||
Alta luz: | El equipo de prueba de los juguetes del EN 71-1,170kg juega el equipo de prueba,probador de la fuerza de los tubos de la dirección de la vespa del EN 71-1 |
Application: Toys Scooter Steering Tubes Strength Tester apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces. Standards: EN 71-1; ISO 8124-1 |
1.Resistance to downward forces
Place the toy scooter on a horizontal plane and secure it so that it will stand upright during the test.Check that the locking devices are correctly engaged.
A) For toy scooters with two handles, suspend a mass of (50+/-0.5)kg at the centre of each handle. (see Figure 1 a) Maintain the load for 5 min. Determine whether the steering tube collapses and the locking devices are still operable and engaged. Remove the 50kg masses. Release the main locking devices and with the secondary locking device still engaged, load the handles with a mass of (25+/-0.2)kg each and maintain the load for 5 min. Determine whether the secondary locking device is still operable and engaged.
B) For toy scooters with steering tubes without handles, perform the test using a load with a mass of (100+/-1)kg and (50+/-0.5)kg respectively on top of the tube.(see Figure 1 b)
2.Resistance to upward forces
Place and secure the toy scooter upside down on a podium(see Figure 3 c). Check that the locking devices are correctly engaged.
A)For toy scooters with two handles, suspend a mass of (25+/-0.2)kg at the centre of each handle. Maintain the load for 5 min.
B) For toy scooters with steering tubes without handles ,place a mass of (50+/-0.5)kg on the end of the steering tube. Maintain the load for 5 min. Determine whether the steering tube has separated and the locking devices are still operable and engaged.
Model |
GT-M82 |
Loading method |
Cylinder loading |
Control mode |
Touching screen control |
Test load |
(25±0.2)kg (50±0.5)kg (100±1)kg |
Dimension |
1200×1000×1700mm |
Weight |
170kg |
Standards |
ISO 8124-1 section 5.29 |
Optional accessories |
GT-MA12 Air compressor |